All Categories
GET IN TOUCH

Home /  Products /  M12 CAN Bus CANopen NMEA2000 Cable

DeviceNet CANopen Profibus M12 5 Pin Female Field Installation Termination Resistor with 120 ohm Resistor


Circular Connector M12 A-Code 5 Pin Female Termination Resistor with 120-ohm Resistor

M12 Micro-C Termination Resistor for DeviceNet CAN Bus CANopen

NMEA2000 M12 5 Poles Micro-Change Bus Terminating Resistor

Micro-Change Terminator Resistor, Female 5 Poles, A Coding

IP67, 120-ohm 1/4W Resistor between Pin 4 and Pin 5


  • Introduction
  • More Products
  • Inquiry

Description


Introduction:

The M12 5 Pin Female Termination Resistor integrates a 120-ohm resistor to ensure proper signal termination and maintain signal integrity in industrial networks such as DeviceNet, CANopen, CAN Bus, Profibus, as well as NMEA2000 (N2K). It is designed for use at both ends of the bus to eliminate signal reflection, preserve signal quality, and ensure reliable data communication. It adopts the robust M12 5-pin female connector, suitable for easy field installation in industrial automation applications. Premier Cable P/N: PCM-0480

Specification:

Type M12 CAN Bus CANopen NMEA2000 Cable
Product Name DeviceNet CANopen Profibus M12 5 Pin Female Field Installation Termination Resistor with 120 ohm Resistor
Drawing No. PCM-0480
Connector M12 A-Coding 5 Pin Female
Resistor 120-ohm 1/4W
Locking Method Screw-Locking
Communication Standards DeviceNet, CAN Bus, CANopen, NMEA2000, Profibus
Color Blue, Or OEM
Jacket Material PVC 45P
Certificate RoHS

Features:

  1. Field Installation: The M12 Termination Resistor is designed for easy and quick field installation, reducing downtime and simplifying network setup.
  2. M12 5-Pin Female Connector: Feature an industry-standard M12 5-pin female connector, effectively preventing missmating and reducing the risk of connection errors.
  3. 120-Ohm Resistor: The integrated 120-ohm resistor provides precise signal termination to avoid signal degradation and data errors.
  4. IP67 Rating: The protection rating is IP67, that is to say, the M12 termination resistor can withstand harsh industrial conditions and provides resistance to dust, moisture, and waterproof. 

How to Install the M12 5 Pin Termination Resistor:

To install the M12 5 Pin Termination Resistor with a 120-ohm resistor, pls refer to the following steps:

  1. Turn of the Power: Before installation, plsease ensure that the network power is turned off to avoid any electrical hazards or damage.
  2. Identify Installation Points: Please determine the correct installation locations for the termination resistors. They should be installed at each end of the trunk line of networks. 

  3. Prepare the Connector: If necessary, plsease prepare the M12 5-pin termination resistors in advance by ensuring that they are compatible with your network devices.

  4. Connect the Resistor: Pls attach the M12 5-pin termination resistors to the corresponding M12 male connectors at the both ends of the bus. And ensure that the connection is secure and that the pins are properly aligned.

  5. Verify the Installation: Pls make sure the M12 A-Coding 5-pin termination resistors are correctly installed in the connector and that there are no loose or improper connections.

  6. Power Up: Turn the power back on to the network to check whether the system can operate with the added termination resistors.

  7. Test the Network: Last but not least, pls verify that there are no communication errors or issues with signal integrity and ensure that the data transmission is stable and that the termination resistors are functioning as intended.

By following the above steps, you will ensure that the termination resistors are installed correctly, helping to maintain the performance and reliability of your DeviceNet, CANopen, Profibus, or other industrial networks.

Drawing:

DeviceNet CANopen Profibus M12 5 Pin Female Field Installation Termination Resistor with 120 ohm Resistor details

Inquiry