M16 Remote Electrical Tilt AISG Control Cable is used to connect antennas with RET systems, allowing remote adjustment of antenna tilt. It features M16 connectors and complies with AISG standards, facilitating efficient control of antenna positioning and enhancing network performance in telecommunications systems.
Description
Introduction:
M16 Remote Electrical Tilt AISG Control Cable is used to connect antennas with RET systems, allowing remote adjustment of antenna tilt. It features M16 connectors and adheres to AISG standards, facilitating efficient control of antenna positioning and enhancing network performance in telecommunications systems. It is also compatible with Kathrein, Ericsson, Nokia ( Alcatel-Lucent), Commscope, Radio Frequency Systems, Huawei, and Comba.
Specification：
| Type | M16 AISG RET Cable |
| Product Name | M16 Remote Electrical Tilt AISG Control Cable |
| Connector | M16 8 Pin, Din Male, Din Female |
| Cable Length | 0.5m, 1m, 2m, 3m, 4m, 5m, 7m, 8m, 10m, 13m, 15m, 20m, 25m, 30m, 35m, 40m, 45m, 50m, 60m, 70m, 80m, 90m, 100m, Or Customized |
| Cable Specification | 24AWG*2+20AWG*4 |
| Standard | Antenna Interface Standards Group, IEC 60130-9 |
| Compatible Brand | Kathrein, Ericsson, Nokia ( Alcatel-Lucent), Commscope, Radio Frequency Systems, Huawei, Comba |
| Protocol | AISG 1.1, AISG 2.0 |
| Compliance | IP67 Rating |
| Certificate | UL, Rohs, Reach |
What is AISG RET Cable?
AISG: Refers to Antenna Interface Standards Group AISG protocol.
RET: Stands for Remote Electrical Tilt, a technology that allows for adjusting an antenna's tilt angle from a remote location rather than manually adjusting it on-site.
AISG RET Cable is a specialized cable used in telecommunications to facilitate the remote adjustment of antenna tilt. It plays a crucial role in 5G base stations, outdoor towers, and wireless communications. As a part of the AISG protocol, it provides critical support for Remote Antenna Tuning (RET) systems.
Besides, AISG RET cable also supports high-frequency transmission and works together with equipment such as radio frequency units (RRU) and remote radio frequency units (RRH) in 5G base stations. Through the AISG protocol, the connection line enables remote adjustment of antenna parameters, optimizes antenna system performance, and improves the coverage and capacity of the 5G network.
Premier Cable manufactures AISG RET cables, made of high-quality materials to ensure reliability and durability in extreme outdoor environments. Its special design complies with 4G 5G technical standards and provides high-speed, low-latency communication connections for base stations. Adapted to the special needs of outdoor tower installation, the connecting cable is waterproof, dustproof, and corrosion-resistant to ensure stable operation under various climate conditions.
Pin Assignment:
AISG Male Connector has 6 pins, which are used to transmit control signals, power, and ground. Among them, two pins are used to transmit bidirectional digital control signals to control the adjustment of the antenna direction, tilt angle, and other parameters; the other 4 pins are used to transmit power supply, including positive, negative, and ground wires.
For the female pin assignment, pls refer to the table below.
| P1 | +12 V DC Nominal |
| P2 | Not Connected |
| P3 | RS485 B |
| P4 | RS485 GND |
| P5 | RS485 A |
| P6 | +24 V DC Nominal |
| P7 | DC Return |
| P8 | Not Connected |
Note:
Pls refer to these pin assignments before placing the order. Thank you.
Application:
EN
AR
BG
HR
CS
DA
NL
FI
FR
DE
EL
HI
IT
JA
KO
NO
PL
PT
RO
RU
ES
CA
TL
IW
LT
SR
UK
VI
GL
AF
GA
CY
MK
HY
EU
BN
CEB
NE
MY
SU
